Skip to content

Window Installation

Two homes can get the same impact-rated window from the same manufacturer in the same week and end up with completely different outcomes. The difference is the opening it goes into, and that is the part we have never outsourced.

Family-

Owned

Certified

Contractor

30 Years

Experience

Lifetime

Warranty

Two Ways to Put a Window In

Insert installation

The new unit fits inside the existing frame, leaving your original frame and interior and exterior trim in place. Faster, less invasive, and the right answer when the existing frame is sound. Nothing is gained by tearing out material that is doing its job.

Full-frame installation

Everything comes out down to the structural opening: old frame, sill, the lot. It is the only correct approach when the frame has rot, water damage, or was never properly flashed, and it is often necessary when an opening has moved over decades. Skipping it when it is needed seals a problem inside the wall.

Sealing the Opening Is the Job

The window is a manufactured product with a published performance rating. It arrives the way it arrives. Everything that varies between a good installation and a bad one happens in the opening around it.

The opening is prepared square and clean, the unit is set level and plumb and fastened to the structure to the manufacturer’s pattern rather than to whatever seems sufficient, the perimeter is flashed and sealed so water that gets behind the cladding is directed back out, and the interior is insulated and finished. Fastening matters more here than in most of the country, because in a storm the load on a window is trying to pull the whole unit out of the wall. A window rated to hold and a window anchored to hold are two different things, and only one of them is decided on your job site.

This is also why manufacturer warranties generally require professional installation. The rating on the sticker describes the unit as tested. It says nothing about the hole you put it in.

Who Does the Work

Our installers are on our payroll, not a subcontractor’s. They are background checked, and they fit our products every week, which means nobody is reading a manufacturer’s instruction sheet for the first time in your living room.

The practical benefit shows up when something needs a second look. One company holds the measurement, the order, the installation, and the warranty, so a question about any of them has exactly one place to go. We are a licensed general contractor (CGC1528702), fully insured, and family owned, with more than thirty years of residential window work behind us. You can see what finished installations look like.

Permits and Inspection

Replacement windows require a permit almost everywhere in Florida, and the finished work has to pass inspection. We file the permit and coordinate the inspection ourselves, so you are not learning a building department’s submission process or waiting on hold to schedule anything.

There is one exception worth naming. If your home is manufactured housing and you do not own the land it sits on, the rules about who may file change, and we will walk you through what that means for your project.

The inspection at the end is not a formality to get past. It is independent confirmation that the products carry Florida Building Code approval for your address and that the installation meets it. In the High Velocity Hurricane Zone the requirements are stricter again. There is more on how impact products are tested and rated.

What Install Day Looks Like

1. The crew arrives and protects the work area

Floor covering goes down and anything in the way gets moved. You will want furniture and window treatments clear of the openings before they get there.

2. They work opening by opening

One window comes out, the opening is prepped, the new unit goes in, and it is sealed and finished before the next one starts. Your home stays secure and livable the entire time.

3. Most homes finish in a day or two

Larger projects run longer. If the job crosses days, your home is left closed up and secure overnight, never open to the weather.

4. Cleanup and a walkthrough

Before the crew leaves they clean up, haul away every old window, and walk the job with you so you can look at each opening while they are still standing in it.

Window installer at work

Start your remodel today.

Pay only when the job’s done.

$0 Down.

No Payments Until Done.

With Direct Remodels, you can upgrade your home with $0 down and no payments until your project is complete to your satisfaction.

After the Installation

Your inspection is scheduled and we handle it. Your warranty is registered, and coverage begins once the project is paid in full. From that point the manufacturer covers parts and materials and Direct Remodels covers service and labor for life, which means a service call goes to the company that did the work. Our customer support team handles it from there.

If you are still comparing quotes rather than scheduling a job, it is worth reading what a full replacement project includes and why homeowners pick us over the other quote.

Our Work Speaks for Itself

Recent Projects

Book a Free In-Home Estimate

Every opening in your house is different, and the only way to know what yours need is for somebody to measure them. Your free in-home estimate takes about an hour, and you will leave it knowing which openings need full-frame work, which can take an insert, and exactly what the project costs.

Questions About Window Installation

An insert installation typically runs under an hour once the crew is set up. Full-frame work takes considerably longer because the opening has to be taken back to structure, reflashed, and rebuilt. That is why a whole-home project is quoted in days rather than by multiplying a per-window figure, and why two houses with the same window count can take different amounts of time.

Somebody should be there at the start so the crew can confirm the scope with you, and at the end for the walkthrough. In between it is up to you. Many homeowners stay and work around it. If you plan to be out for part of the day, tell your project coordinator in advance so access is arranged.

It happens, particularly with rot in the framing of older homes, and it is invisible until the unit comes out. When we find it, work on that opening stops and we show you what is there before anything else is done. You will know what the repair involves and what it changes about the price before we continue.

We sell installed windows rather than windows off a shelf, so the installation is part of what you are buying. Our labor warranty covers work our own crews performed, and it is not something we can extend to an installation we did not do or supervise.

Get Free Estimate

Or, call us to speak with one of our design consultants

813-371-1911
By clicking “Submit” you authorize Direct Remodels to reach out to you via call, email, or text about your project. Opt out at any time. Message/data rates apply. Terms & Conditions | Privacy Policy

Redeem Your Promotion

Drop your details and we'll lock this offer in for you.

Download the Energy Efficiency Guide

Tell us where to send your free PDF — practical tips for keeping your Florida home cooler and your energy bills lower.

Hold On!

Get an additional 10% off immediately when you chat with a design consultant now.

This field is for validation purposes and should be left unchanged.